EU-046 DIESEL PARTICULATE FILTER CLEANER

Diesel vehicles to dissolves and removes carbon residues accumulated in particulate filters. It provides cleaning without the need to disassemble the particulate filter. After the process, the filters are restored to full capacity. Shake the product well before use. Open the lid. Connect the additional hose with the product to the actuator on the product head. Remove the pressure or temperature sensor on the particulate filter. Through this gap, insert the end of the hose of the product. Spray all the product mixture into the filter. Reconnect the sensor and wait 20 minutes for the mixture to go into the filter. After the process is finished, start the car and run it at 2500 rpm, paying attention to the temperature, or perform the operation manually with a tester or by performing a test drive. After these operations, examine the fault codes. Reset faults if necessary. Repeat the process on very dirty filters.